Why grounding copper platoon, grounding bus?

Basically has the following several aspects

1. Copper resistance coefficient is small, easy to discharge as soon as possible.

2. And just think of all of earth to go out, that is much more wide line to ground wire, ground wire and very thick, so often in the machine room are a few equipment there will be a grounding line.

3. No rust

4. Easy to maintain and room wiring

Hangzhou hua mai communication technology co., LTD., the characteristics of the grounding copper platoon

A product profile of the

Grounding copper platoon using T2 pure copper as advocate material, dogan feeder provides a centralized location.It can be installed in the tower, the base station grounding place indoor and outdoor and any other requirements.Is making the products in strict accordance with the relevant IEC standard, applicable to all types of wire nose grounding terminal, after surface treatment, good conductivity, interface does not produce oxidation, guarantee the reliable electrical conductivity.The overall design is reasonable, the product with a standard supporting insulator, and fixed with steel frame, with expansion screws, finally to the required location.

 

 

Two materials and process and technical parameters

Grounding copper platoon surface can choose silver or nickel plating processing, small material resistance, good conductive.Processing used in punch punching or drilling machine, makes the hole accurately, the aperture size.Insulator using polyester resin raw materials, good insulation, high strength, steel fixed stent after molding, electroplating and purification on the surface, beautiful and corrosion resistance